Pool Slides (Commercial & Residential)
Serial numbers are found on the upper portion of the slide: on the side of the Rogue2 and Vortex models, and on the upper ladder section of all other deck mounted, including SlideAway, and are formatted as SR-XXYY-*****
Custom and pre-configured slides (BigRide, Garden ride, River Run, BYOS2) serial numbers begin with Y and will be located next to the safety label on the entry section of the slide.
Diving Boards (Commercial & Residential)
For 6’ through 12’ boards serial numbers are found on the back left corner of the board and are formatted as SR-ACYY-***** (The format for the Olympian is SR-AYY-XXXX). For 14’ – 16’ commercial boards serial numbers are found on the left end corner of the board and are formatted as SR-ACYY-*****
Diving Bases (Residential):
Serial numbers for fiberglass bases are located on the front of the base. For steel bases, serial numbers are under the top mounting plate, and for spring bases, serial numbers are on the underside of the spring and are formatted SR-SYY-XXXX, SR-FYY-XXXX or SR-RYY-XXXX
Diving Bases (Commercial):
Bases often have two serial numbers: one located on the underside of the first bend in the handrail, the second located near the back of the base where the board mounts, both are formatted as SR-RYY-X-XXXX
Rails and Ladders (Commercial & Residential):
Serial numbers are on the underside of the first bend in the rail and are formatted as SR-RYY-**-****
Basketball Games (Commercial & Residential):
Serial numbers are found under the top curve of the leg section and are formatted as SR-RYY-**-****
Serial numbers are located on the top portion of one upright and are formatted as SR-RYY-**-****
Serial numbers are found on the mast, where the mast passes through the housing, opposite of the Made in USA sticker, and are formatted with a letter and 4 to 5 numbers depending on age of lift: (A, P, S, M)-XXXX(X)
Serial numbers for the frame are located on the upper right corner of the frame and are formatted as SR-RYY-XXXXX. The foot board has an independent serial number located on the underside and is formatted as SR-FBYY-XXXXX
Wet Deck Water Features:
Serial numbers are located on the inside door of the Aqua Director control box and are formatted as SR-SYY-XXXX
Tables & Seats:
The serial number will start with Y and will be located on the underside of the table.
The serial number will start with Y and it will be located on the back side of the lounger next to the safety label.
Serial numbers for S.R.Smith LED Lighting products can be found on the outside carton of the individual products next to the product SKU label. This includes all TREO, FG (Fiberglass), TREO Micro, kēlo, and ModLite® lighting products as well as all Power Tower (PT-6001/6002) and poolLUX transformers and lighting controls (PLX-PW/PL, and PLX-PRM). If for some reason the carton serial number labels are illegible, the actual serial numbers on the products may be found in the following locations:
TREO, Fiberglass, kēlo Pool Lights
The serial number will be found on the side of the black body that fits into the wall fitting and will not be visible once the light is installed without removal. In the case of the FG Light, the black lamp housing will need to be unscrewed from the threaded white cassette (niche) to view the label.
TREO and Fiberglass light serial numbers will be formatted as 315xxxxxx
Kelo light serial numbers will be formatted as 330xxxxxx
micro Pool Lights
The serial number will be imprinted on the label applied to the side of the translucent body that fits into the custom wall fitting and will not be visible once the light is installed without removal.
micro light serial numbers will be formatted as 320xxxxxx
Mod-Lite® with PowerPass® Wireless Technology
On new complete lights, the serial number labels can be found in two places - the back of the PowerPass emitter flange which is not visible once installed as well as the back of the Trim Plate flange on the lamp module it was originally shipped with.
Mod-Lite serial numbers will be formatted as 335xxxxxx
Power Tower PT-6001/PT-6002 Fiber to LED Conversion Kits
The serial number can be found on the product model and specs label on the back of the tower, above the cutout for the toggle control switches.
PT-6001 serial numbers will be formatted as 218xxxxxx
PT-6002 serial numbers will be formatted as 220xxxxxx
poolLUX™, poolLUX™ Plus and poolLUX™ Plus2 Power Transformers (PLX-PW/PL)
The serial number can be found on the inside of the front cover panel. To gain access, with strong finger pressure, open the enclosure by pulling the front cover off evenly by the top and bottom tabs. Do not angle or ‘hinge’ the cover excessively when removing or damage may occur. If you cannot open the enclosure by hand, use a coin or flat blade screwdriver to twist open the finger tabs of the cover at the top and bottom of the unit.
poolLUX Power and poolLUX Plus serial numbers will be formatted as 216xxxxxx
poolLUX™ Premier Custom Lighting System (PLX-PRM)
The serial number can be found on the ceiling of the main low voltage wiring bay where the light cord make their electrical connection. To gain access, open the enclosure by unscrewing the six (6) panel cover screws with a straight blade screwdriver; DO NOT USE A POWER DRIVER. Gently separate and support the front cover as it will still be connected by a ribbon cable to the main enclosure.
PLX-PRM serial numbers will be formatted as 214xxxxxx